**Please strictly adhere to the following resume naming convention:
ALL CAPS, NO SPACES B/T UNDERSCORES
: -
PTN_US_GBAMSREQID_CandidateBeelineID
i.e. PTN_US_9999999_SKIPJOHNSON0413
MSP Owner: Patrice Patrick
Location: Fridley Minnesota, 55421
Duration: 12 months
skill id: 10864385
Job Title: Senior AUTOSAR Software Developer
Must Have Skills:
Strong expertise in AUTOSAR Software development.
Hands-on experience with Vector DaVinci Developer and DaVinci Configurator tools. (Vector DaVinC experience is mandatory for this position.)
Proven experience in configuring and integrating AUTOSAR BSW modules, including:
BSW Management, ECU Management (ECUM), OS Configuration
Communication stack: COM, CAN, DCM
Memory stack: Fee, Fls
DMA and other low-level drivers
Experience with integration of ASWC-generated code and resolving dependencies.
Knowledge of AUTOSAR-based application layer development.
Hands-on experience with RTE behaviour in multicore systems
Strong experience in RTE generation and configuration.
Familiarity with bootloader-related modules.
Experience in multicore system configuration and management.
Knowledge of AUTOSAR-based application layer development.
Hands-on experience with RTE behavior in multicore systems.
Strong experience with Infineon TC3xx microcontroller family.
In-depth knowledge of peripherals/modules such as:
GTM (Generic Timer Module)
PWM, EvADC, DTM, DSADC
WDG (Watchdog), TIM, SMU
Experience with communication protocols: J1939, XCP, CAN
Hands-on experience with peripherals: CAN, SPI (Daisy Chain), UART
Experience in Complex Device Driver (CDD) development, especially for ASCIS.
Exposure to Flash driver development.
Strong programming skills in Embedded C for real-time systems.
Working knowledge of GitHub / GitLab for source code management.
Good understanding of: Hardware schematics, wiring diagrams, harness, power supply
Hands-on experience with tools like: TRACE32 debugger, CANape, CANdb++, Oscilloscope, DMM
Roles & Responsibilities
Design development of BSW ( AUTOSAR-based) embedded software.
Configure and integrate BSW modules and ensure compliance with project requirements.
Perform RTE generation, configuration, and validation for AUTOSAR systems.
Work on multicore ECU configurations, ensuring efficient task distribution and system performance.
Integration of Application Software Components (ASWC) with proper dependency handling
Managerial Skills:
Managing the program changes and coordinating with team
Support team in performing root cause analysis
Pre-Screening Questionnaire
This position will require the selected candidate to report on-site min 60% of the time each week. This could vary week to week.
Experience in handling of OEM calibration tools.
Prior minimum 8 years' experience in a relevant discipline is required, with a proven track record in technical problem-solving and quality decision-making.
Recent Rejection Feedback:
Candidate Status Reason Rejection Comments
RM Disqualified Skill set does not meet requirements The candidate appears to have worked primarily in an integration role, with no clear understanding of the configurator and developer workflows or the related development activities. Therefore, we cannot move forward.
RM Disqualified Skill set does not meet requirements The candidate has mainly worked in MBD development and systems engineering and lacks a clear understanding of BSW development and Vector tool usage. Hence, the profile is not being considered further.
RM Disqualified Skill set does not meet requirements After reviewing the candidate's resume, I found that their experience is primarily in Model-Based Development. I did not find sufficient experience in BSW (Basic Software) using Vector DaVinci Configurator and DaVinci Developer tools. Although the candidate has listed these tools as additional skills, I could not find any related tasks, responsibilities, or project descriptions demonstrating hands-on experience with them
RM Disqualified Skill set does not meet requirements The candidate has limited understanding of BSW development, particularly RTE and MCAL configuration, with vector tools which are primary requirements for this project. Hence, the profile is not being considered further.
RM Disqualified Skill set does not meet requirements After reviewing the candidate's resume, I did not find hands-on experience with AUTOSAR tools such as Vector DaVinci cfg and developer which is a primary requirement for this project.
RM Disqualified Skill set does not meet requirements The candidate has mainly worked as an integrator of application components and lacks a clear understanding of overall BSW and MCAL configuration development. Hence, the profile is not being considered further
RM Disqualified Skill set does not meet requirements After reviewing your resume, I t has decided not to proceed with your application, as your experience is primarily in Model-Based Development, and I did not find sufficient experience in BSW (Basic Software) and core microcontroller modules that aligns with the requirements of this position.
RM Disqualified Skill set does not meet requirements After reviewing your resume, I have decided not to proceed with your application, as candidate's experience is primarily in Model-Based Development, and I did not find sufficient experience in BSW (Basic Software) and core microcontroller modules that aligns with the requirements of this position.
RM Disqualified Skill set does not meet requirements After reviewing the resume, it was observed that the candidate does not have experience with Vector tools (DaVinci Configurator and DaVinci Developer), which are primary requirements for the project. Therefore, we will not be able to move forward with this profile.
ALL CAPS, NO SPACES B/T UNDERSCORES
: -
PTN_US_GBAMSREQID_CandidateBeelineID
i.e. PTN_US_9999999_SKIPJOHNSON0413
MSP Owner: Patrice Patrick
Location: Fridley Minnesota, 55421
Duration: 12 months
skill id: 10864385
Job Title: Senior AUTOSAR Software Developer
Must Have Skills:
Strong expertise in AUTOSAR Software development.
Hands-on experience with Vector DaVinci Developer and DaVinci Configurator tools. (Vector DaVinC experience is mandatory for this position.)
Proven experience in configuring and integrating AUTOSAR BSW modules, including:
BSW Management, ECU Management (ECUM), OS Configuration
Communication stack: COM, CAN, DCM
Memory stack: Fee, Fls
DMA and other low-level drivers
Experience with integration of ASWC-generated code and resolving dependencies.
Knowledge of AUTOSAR-based application layer development.
Hands-on experience with RTE behaviour in multicore systems
Strong experience in RTE generation and configuration.
Familiarity with bootloader-related modules.
Experience in multicore system configuration and management.
Knowledge of AUTOSAR-based application layer development.
Hands-on experience with RTE behavior in multicore systems.
Strong experience with Infineon TC3xx microcontroller family.
In-depth knowledge of peripherals/modules such as:
GTM (Generic Timer Module)
PWM, EvADC, DTM, DSADC
WDG (Watchdog), TIM, SMU
Experience with communication protocols: J1939, XCP, CAN
Hands-on experience with peripherals: CAN, SPI (Daisy Chain), UART
Experience in Complex Device Driver (CDD) development, especially for ASCIS.
Exposure to Flash driver development.
Strong programming skills in Embedded C for real-time systems.
Working knowledge of GitHub / GitLab for source code management.
Good understanding of: Hardware schematics, wiring diagrams, harness, power supply
Hands-on experience with tools like: TRACE32 debugger, CANape, CANdb++, Oscilloscope, DMM
Roles & Responsibilities
Design development of BSW ( AUTOSAR-based) embedded software.
Configure and integrate BSW modules and ensure compliance with project requirements.
Perform RTE generation, configuration, and validation for AUTOSAR systems.
Work on multicore ECU configurations, ensuring efficient task distribution and system performance.
Integration of Application Software Components (ASWC) with proper dependency handling
Managerial Skills:
Managing the program changes and coordinating with team
Support team in performing root cause analysis
Pre-Screening Questionnaire
This position will require the selected candidate to report on-site min 60% of the time each week. This could vary week to week.
Experience in handling of OEM calibration tools.
Prior minimum 8 years' experience in a relevant discipline is required, with a proven track record in technical problem-solving and quality decision-making.
Recent Rejection Feedback:
Candidate Status Reason Rejection Comments
RM Disqualified Skill set does not meet requirements The candidate appears to have worked primarily in an integration role, with no clear understanding of the configurator and developer workflows or the related development activities. Therefore, we cannot move forward.
RM Disqualified Skill set does not meet requirements The candidate has mainly worked in MBD development and systems engineering and lacks a clear understanding of BSW development and Vector tool usage. Hence, the profile is not being considered further.
RM Disqualified Skill set does not meet requirements After reviewing the candidate's resume, I found that their experience is primarily in Model-Based Development. I did not find sufficient experience in BSW (Basic Software) using Vector DaVinci Configurator and DaVinci Developer tools. Although the candidate has listed these tools as additional skills, I could not find any related tasks, responsibilities, or project descriptions demonstrating hands-on experience with them
RM Disqualified Skill set does not meet requirements The candidate has limited understanding of BSW development, particularly RTE and MCAL configuration, with vector tools which are primary requirements for this project. Hence, the profile is not being considered further.
RM Disqualified Skill set does not meet requirements After reviewing the candidate's resume, I did not find hands-on experience with AUTOSAR tools such as Vector DaVinci cfg and developer which is a primary requirement for this project.
RM Disqualified Skill set does not meet requirements The candidate has mainly worked as an integrator of application components and lacks a clear understanding of overall BSW and MCAL configuration development. Hence, the profile is not being considered further
RM Disqualified Skill set does not meet requirements After reviewing your resume, I t has decided not to proceed with your application, as your experience is primarily in Model-Based Development, and I did not find sufficient experience in BSW (Basic Software) and core microcontroller modules that aligns with the requirements of this position.
RM Disqualified Skill set does not meet requirements After reviewing your resume, I have decided not to proceed with your application, as candidate's experience is primarily in Model-Based Development, and I did not find sufficient experience in BSW (Basic Software) and core microcontroller modules that aligns with the requirements of this position.
RM Disqualified Skill set does not meet requirements After reviewing the resume, it was observed that the candidate does not have experience with Vector tools (DaVinci Configurator and DaVinci Developer), which are primary requirements for the project. Therefore, we will not be able to move forward with this profile.